Maizic V380 Pro 4g Cameras 2 Min Installation Link
🚀 Quick Start
Maizic Camera — Installation & Troubleshooting
Follow these steps, watch the quick videos, register your warranty, and get the right accessories—everything on one page.
Watch: Quick Start (2 mins)
Tip: keep the camera 6–8m from the router for first setup.
Install in 5 Steps
Open this page by scanning the QR code on your box.
Insert a high-endurance microSD (optional) and power on the camera.
Connect to 2.4 GHz Wi-Fi (or insert an active nano-SIM for 4G models).
Open the app → tap + → follow the voice prompts.
Check live view, enable motion alerts / continuous recording.
Authorized Accessories
Officially Supported Memory Cards
- Maizic 32GB microSD — Light recording.
- Maizic 64GB microSD — Recommended.
- Maizic 128GB microSD — Best for 24×7.
Format inside the app after first insert.
Official Power Adapters
- 12V 2A Adapter — Outdoor/PTZ models.
- 5V 2A Adapter — Indoor/Bulb/USB models.
Check your model label for voltage.
SIM Plans (4G Models)
Recharge online in seconds.
Open SIM Recharge- Prefer strong signal (2–3 bars+).
- Keep mobile data on for remote view.
Warranty & Upgrades
Replace links if your upgrade URL differs.
Troubleshooting Videos
Quick FAQs
App can’t find camera
Reset (hold 5–10s) → use 2.4 GHz Wi-Fi → move camera near router → disable VPN → retry.
SD Card Not Detected
Use a high-endurance card, insert firmly, format in app, reboot. Ensure stable power.
No Motion Alerts
Enable motion detection, set sensitivity, allow phone notifications, check DND.
Night Vision Dark
Clean lens, enable IR/Color NV, avoid glass reflections, use official adapter.
